Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Laser PP CP 60 - PP - Diamond Plastics GmbH

Material Data Center offers the following functions for Laser PP CP 60:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Laser PP datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - 機械的特性 - 熱的特性 - その他の特性.
Any use of this information falls under the rules of our disclaimer.
Processing/Physical Characteristics値単位テスト基準
ISO データ
メルトフローレート, MFI 4.5 g/10min ISO 1133
機械的特性値単位テスト基準
ISO データ
引張弾性率 1000[1] MPa ISO 527
引張強度 25[1] MPa ISO 527
破壊ひずみ 26[1] % ISO 527
シャルピー衝撃強さ, +23°C 55 kJ/m² ISO 179/1eU
1: X-axis
熱的特性値単位テスト基準
ISO データ
溶融温度, 10ﾟC/min 135 °C ISO 11357-1/-3
ビカット軟化温度, A 119 °C ISO 306
その他の特性.値単位テスト基準
密度. 900 kg/m³ ISO 1183
Bulk density 330 kg/m³ -
特殊な特性
成形加工法.
Additive Manufacturing, Laser Sintering
納入形状.
パウダー., ナチュラルカラー
な特性
Low Warpage, Weldable
耐薬品性
General Chemical Resistance
領域別の利用可能性
ヨーロッパ.
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.